Equipos Medicos

Cirugía y Instrumental

  • Conmed - 5000

    Conmed System 5000 Features

    The Conmed 5000™ Electrosurgery Unit (ESU) unites technology with versatility providing the opportunity to fine-tune the electrosurgical generator to specific procedure and surgeon preferences. Unique modes on the System 5000™ include the Fluids Mode, for an additional boost of energy in procedures taking place in a fluid environment, and Lap Mode, which limits open circuit voltages to below 2700 volts in all modes and reduces the potential risk of inadvertent burns from capacitive coupling.

    Dynamic Response Technology

    The System 5000™ generator features proprietary Dynamic Response Technology. This technology delivers optimal clinical effects in all operational modes through the continuous synchronization of current and voltage. Advanced Digital Signal Processing architecture enables the system to sample current and voltage over 450,000 times per second and adjust the output accordingly to deliver consistent tissue effect.

    Easy to use

    The System 5000's ergonomic design and intuitive interface have been designed for easy, stress-free use in the high-pressured surgical environment. The durable electrosurgical unit includes user-programmed memory settings, which are easy to switch for different procedures or surgeons.

    Compatability

    System 5000 meets the procedure-specific energy output required for robotic surgery and has been formally validated for use with the Da Vinci Surgical System. A custom energy activation cable seamlessly connects the two advanced pieces of equipment, and this compatibility provides a sophisticated, minimally invasive option for performing major surgery.

     

    • General Mode, traditionally used in open procedures.
    • Fluids Mode - Quick start-up in fluid environments, such as urology or arthroscopy.
    • Laparoscopic Mode, Limits output voltage to minimize potential harmful effects of capacitive coupling and insulation breakdown.
    • Pulse Cut, useful when precise cutting effect is needed around delicate structures.
    • Pulse Coag, provides superficial homeostasis via pulsing bursts of coagulation energy.
    • Bipolar Output Meter, provides feedback on desiccation levels via audible and visual indicators.
    • ARM (Automatic Return Monitoring), provides advanced warning of compromised patient to dispersive electrode contact.

     

    Conmed System 5000 Specifications

     

    Monopolar Cut (blend) Coagulate

    • Max. Energy Output (at rated ohms) (Systems)
      • More than 250 Watts 300
      • Max Peak Voltage: 820 Pure
    • Max. Energy Output (at rated ohms) (Systems)
      • Up to 150 Watts 80
      • Max Peak Voltage: 6,350 spray

    Bipolar (Macro, Micro)

    • Max. Energy Output (at rated ohms) (Systems)
      • Up to 150 Watts 90
      • Max Peak Voltage: 610 Macro
    • Max. Energy Output (at rated ohms) (Systems)
      • Up to 50 Watts 50
      • Max Peak Voltage: 170 Micro

    Dimensions

    • 14” x 35” x 48” (5.5cm x 13.5cm x 18.9 cm")

    Weight

    • 9.8 lbs. (21.5 kg)

    Generator

    • Solid-state

    Frequency

    • 391 cut, 562 coag
    • 391 bipolar

    Cooling System

    • Convection, fan

    Independent Output

    • Yes

    Power Setting Display

    • Yes

    Visual (Alerts)

    • Yes

    Audible (Alerts)

    • 2 tones

    Volume Control (Signals)

    • Yes

    Power Needed, VAC (Energy)

    • 90-127, 198-253"

    Bandwidth (Outputs)

    • 2

    Footswitch

    • Yes

    Bipolar System

    • Yes

    Ver Precio

  • Steris - Amsco 2080 electrica

    Steris Amsco 2080 Series Features

    The Amsco Quantum 2080 General Surgical Table is supplied with a removable headrest unit, pendant hand control unit, and a set of electrically conductive table top cushions. This surgical table is electrically powered and requires 120v/60Hz power supply. Its weight capacity is 300lbs. 
    AMSCO 2080 GENERAL SURGICAL TABLES ARE BUILT WITH QUALITY AND ARE BUILT TO LAST. The Amsco 2080 General Surgical Tables are easy to use, versatile and well within your budget. 
    The Amsco 2080 General Surgical Tables are designed to accommodate a maximum 300 pound load.

     

    • Pedestal includes tabletop lift cylinder and support column with bearing-mounted saddle frame fully enclosed by stainless-steel, telescoping shrouds.
    • Each shroud is one-piece construction to ensure against foreign matter entering the elevating mechanism.
    • 300 lb weight capacity,
    • Side rails for accessories
    • Adjustable head rest.
    • Features include back up/down, leg up/down, Trendelenberg/Reverse Trendelenberg
    • Tabletop is 20-inch wide tabletop is divided into four hinged sections: head, back, seat, foot. Each section is cast aluminum (back, seat, and foot sections are covered by stainless-steel veneer).
    • Refurbished with 1 year warranty

     

    Steris Amsco 2080 SeriesSpecifications

     

    Product Specifications

    • Length w/o head rest: 71.25” (1810 mm)
    • Length with head rest: 84” (2117 mm)
    • Width (back/seat plate): 20” (508 mm)
    • Width with side rails: 22” (559mm)
    • Weight of Table: 690 lbs (313 kg)
    • Maximum permissible load (Lift): 300 lbs (136 kg)
    • Maximum permissible load (Articulation): 300 lbs (136 kg)
    • Height: 27 - 45” (686 - 1134 mm)
    • Lateral tilt (left/right: 10°
    • Trendelenburg: ± 20°
    • Reverse Trendelenburg: ± 20°
    • Kidney Bridge: 4-1/2” (113 mm)
    • Back up/down: +90° / -10°
    • Leg up/down: +0° / -105°
    • Top Slide - Head: 7.5” (190mm)
    • Top Slide - Foot: 13.5” (343mm)
    • Flex: -15° back/ -20° seat
    • Reflex: +10° back/ +15° seat
    • Additional Features: Battery Operation: No - Backup Controls: Manual - Tabletop Rotation: No - Return to level feature: No

    Ver Precio

  • Steris - Amsco 2080 manual

    Steris Amsco 2080 Series Features

    The Amsco Quantum 2080 General Surgical Table is supplied with a removable headrest unit, pendant hand control unit, and a set of electrically conductive table top cushions. This surgical table is electrically powered and requires 120v/60Hz power supply. Its weight capacity is 300lbs. 
    AMSCO 2080 GENERAL SURGICAL TABLES ARE BUILT WITH QUALITY AND ARE BUILT TO LAST. The Amsco 2080 General Surgical Tables are easy to use, versatile and well within your budget. 
    The Amsco 2080 General Surgical Tables are designed to accommodate a maximum 300 pound load.

     

    • Pedestal includes tabletop lift cylinder and support column with bearing-mounted saddle frame fully enclosed by stainless-steel, telescoping shrouds.
    • Each shroud is one-piece construction to ensure against foreign matter entering the elevating mechanism.
    • 300 lb weight capacity,
    • Side rails for accessories
    • Adjustable head rest.
    • Features include back up/down, leg up/down, Trendelenberg/Reverse Trendelenberg
    • Tabletop is 20-inch wide tabletop is divided into four hinged sections: head, back, seat, foot. Each section is cast aluminum (back, seat, and foot sections are covered by stainless-steel veneer).
    • Refurbished with 1 year warranty

     

    Steris Amsco 2080 SeriesSpecifications

     

    Product Specifications

    • Length w/o head rest: 71.25” (1810 mm)
    • Length with head rest: 84” (2117 mm)
    • Width (back/seat plate): 20” (508 mm)
    • Width with side rails: 22” (559mm)
    • Weight of Table: 690 lbs (313 kg)
    • Maximum permissible load (Lift): 300 lbs (136 kg)
    • Maximum permissible load (Articulation): 300 lbs (136 kg)
    • Height: 27 - 45” (686 - 1134 mm)
    • Lateral tilt (left/right: 10°
    • Trendelenburg: ± 20°
    • Reverse Trendelenburg: ± 20°
    • Kidney Bridge: 4-1/2” (113 mm)
    • Back up/down: +90° / -10°
    • Leg up/down: +0° / -105°
    • Top Slide - Head: 7.5” (190mm)
    • Top Slide - Foot: 13.5” (343mm)
    • Flex: -15° back/ -20° seat
    • Reflex: +10° back/ +15° seat
    • Additional Features: Battery Operation: No - Backup Controls: Manual - Tabletop Rotation: No - Return to level feature: No

    Ver Precio

  • Steris - Amsco 3080 electrica

    Steris Amsco 3080 Features

     

    • Surgical Table with Radio Top
    • One of the most durable, flexible and reliable surgical tables available
    • Brings more efficiency to the operating room
    • Fluoroscopic capabilities
    • Simple patient positioning
    • Returns to level with one simple command

     

    Steris Amsco 3080 Specifications

     

    General

    • Load Limit 400 lbs
    • Maximum Height 44”
    • Minimum Height 27”
    • Trendelenburg 25°
    • Reverse Trendelenburg 25°
    • Lateral Tilt 18°

    Ver Precio

  • Stryker - Berchtold

    Stryker Berchtold® Chromophare® D530 Surgical Light

     

    • Polygon reflector.
    • Includes swivel arm support, housing & flange tube.
    • High luminance of 210,000 Lux for deep surgical area.
    • 20,446 ft. candles.
    • Light 20,446.
    • Color temperature 4500k.
    • Auto switch to reserve bulb.
    • Weight with transformer 50kg.
    • Color rendering index (R a) 94.
    • Intensity ec @ 1 m 130.

    Ver Precio

  • Conmed - Excalibur

    Conmed Excalibur Plus

    Los modelos Conmed Excalibur Power Plus y PC Plus están disponibles en bipolar o monopolar con corte y coagulación. Los Excaliburs son generadores electroquirúrgicos multiuso. El control del microprocesador proporciona al usuario la seguridad y el control. En el ajuste de corte, estas unidades proporcionan 300 vatios de salida. Un interruptor de pedal bipolar está disponible pero opcional como están los carros del balanceo.

    • 10, 000V PTP en spray coagulación
    • Es la única ESU que permite al cirujano ajustar los ajustes de potencia desde el campo quirúrgico con un lápiz es estándar
    • El voltaje de salida controlado patentado de la PC de Excalibur Plus en corte mantiene el voltaje necesario mínimo para el corte liso a través de varios tejidos de la impedancia con daño termal mínimo
    • El Excalibur Plus PC ofrece un corte en forma de bisturí y tres modos de mezcla

    Información General

    • Peso: 40 libras (18.5 kilogramos)
    • Dimensiones: 6.25 “H x 18” W x 22,75 “L (15.9 x 45.8 x 57,8 cm)
    • Red sobre la protección actual: disyuntor combinado de 2 polos/interruptor de alimentación
    • Exactitud de la exhibición de la energía: el mayor de +/-10% de la exhibición o de la carga clasificada +/-3 vatios
    • Enfriamiento: convección natural, conducción y radiación. Sin ventilador
    • Conexiones del paciente al neutro: menos de 10 µA típicos
    • Chasis a neutro: menos de 25 µA típicos
    • Modo del monitor de la sola almohadilla: detector de la continuidad de dos alambres, umbral típico = 10 ohmios
    • Modo dual del monitor de la almohadilla: monitor de la resistencia de dos alambres, gama típica de la aceptación 10 a 150 ohmios, umbral del viaje típicamente el 20% más arriba que la última activación del punto de ajuste del monitor, una indicación visual de la resistencia paciente

    Ver Precio

  • Valleylab - Force FX

    Valleylab Force Fx Features

    The Force FX is a Digital Electrosurgical Unit. The Force FXc is a High Power Digital Electrosurgical Unit. Both generators feature computer controlled Instant Response Technology designed to ensure a consistent clinical effect through all tissue types. You can use handset or footswitch controls to activate the generator. Receptacles are marked to ensure the correct connection of accessories. Indicators alert you when the generator is activated. The Force FX™ allows you to adjust the activation tone volume and reset the mode and power settings used previously. The Force FX™ can be used in conjunction with the Valleylab Force GSU System and the Valleylab Electroshield Monitor. Refer to the manuals provided with these products for more information.

    Valleylab Force Fx Specifications

     

    Dimensions

    • Height: 4.375"
    • Width: 14"
    • Length: 17"

    Weight

    • 18 lbs

    Input Power Requiements

    • Operating Range: 170 – 264.
    • VAC Max Current: 3.5 A in cut and 2 A in coag.

    Output Waveforms

    • Bipolar
      • Precise, standard and Macros: 470 kHz sinusoid

    Monopolar Cut

    • Low: 390 kHz sinusoid. Similar to the pure cut mode except the maximum voltage is limited to a lower value.
    • Pure 390 kHz sinusoid. Blend: 390 kHz bursts of sinusoid, recurring at 27 kHz intervals, 50% duty cycle envelope.

    Monopolar Coag

    • Desiccate: 240 kHz sinusoid repeated at 39 kHz, 8% duty cycle.
    • Fulgurate: 390 kHz damped sinusoidal bursts with a repetition frequency of 57 kHz into 300Ohm.
    • Spray: 390 kHz damped sinusoid bursts with randomized repetition centered at 28 kHz.
    • Frequencies include 21 kHz < f < 35kHz.
    • Output is further modulated by a random 250 Hz envelope with a variable duty cycle.

    Low Frequency Leakage

    • 50 – 60 Hz. Source current, patient leads, all outputs tied together.
    • Normal polarity, intact chassis ground < 10μA.
    • Normal polarity, ground open < 50μA. Reverse polarity, ground open < 50μA.
    • Sink current at high line, all points < 50μA.

    High Frequency Leakage

    • Bipolar: < 59.2 mArms
    • Monopolar: < 150 mArms
    • CEM™: < 150 mArms at < or equal 50 W.

    Power Readouts:

    • Agree with actual power into rated load to within ±15% or 5 watt, whichever is greater.

    Ver Precio

  • Steris - Harmony LC

    The Harmony Halogen Surgical Lighting and Visualization System is a variable pattern, variable intensity surgical lighting fixture designed to provide visible illumination of the surgical field or the patient for the operating room staff. The system also facilitates monitor mounting and transmission of video and optional control signals.

    Common System Configurations:

    • Single
    • Dual 
    • Triple

     

    Optional

    • Flat panel arm monitor(s)

    Ver Precio

  • Skytron - Infinity

    The Skytron Infinity Surgical Light is a powerful light suitable for general procedures, both in a hospital or small OR setting. The light provides high quality shadow control and superior focusing capabilities with both a sterile central handle control and non-sterile side controls. The Glare Reducing soft, white light is ideal for clarity and a pristine viewing field, crucial to a successful procedure. La luz quirúrgica Skytron Infinity es una luz potente adecuada para procedimientos generales, tanto en un hospital como en entornos pequeños de quirófano. La luz proporciona un control de sombra de alta calidad y capacidades de enfoque superiores tanto con un control de mango central estéril como con controles laterales no estériles. La luz blanca suave, que reduce el deslumbramiento, es ideal para la claridad y un campo de visión prístino, crucial para un procedimiento exitoso.

    Ver Precio